Gate motor not working? Common causes and what to check

The short answer: check the power, battery, fuse, release, remotes and beams first

Most gate motors that stop working have one of a few simple problems: no mains power, a flat or worn-out battery, a blown fuse, the manual release left open, a remote problem, blocked safety beams, or something stopping the gate.

Check those first. If none of them is the cause, especially after a storm, it’s probably the control card, the motor or the gearbox, and it’s time for a technician.

Stuck right now? Book a gate motor repair, or WhatsApp us a short video of what the gate does.

On this page:

Switch off the power and keep your hands clear before you touch anything

  • Switch off the mains at the isolator or the breaker before you open the motor cover. Many motors also have a battery, so the card can still be live.
  • Keep fingers away from the rack and the gear. A gate can move without warning when power comes back.
  • Keep children and pets clear while you test the gate.
  • If there’s an electric fence on the gate, switch it off before you touch the gate.
  • Never bridge or cover the safety beams to make the gate close. They’re there to stop the gate closing on a car or a child.
  • Stop and call us if you smell burning, see water inside the box, or hear grinding.

Match what your gate is doing to the likely cause

What the gate doesLikely causesWhat you can check
Nothing at all: no lights, no beepsNo mains and a flat battery; a tripped breaker or isolator; a blown fuseThe breaker, the isolator near the gate, the plug, the fuse
Works slowly, stops halfway, or only works when the power’s onA weak or old batteryIs mains on? How old is the battery?
The motor hums or runs, but the gate doesn’t moveThe manual release is open; a stripped gearThe manual release lock
Opens but won’t closeThe safety beams are blocked, dirty or out of lineAnything between the beams, dirt or webs on the lenses
The remote does nothing, but the button or intercom worksFlat remote battery; the remote isn’t coded; receiver faultTry a second remote; replace the remote’s battery
Stops and reverses on its ownSomething in the track, stiff wheels, a heavy or bent gateThe track; push the gate by hand in manual mode
Opens and closes by itselfA stuck remote button, an intercom or GSM unit triggering it, or a control card faultTake the battery out of each remote in turn; switch off the intercom or GSM unit
Clicks but doesn’t openWeak battery; the motor or card can’t drive the gateBattery; whether the gate moves freely by hand
BeepsThe motor is reporting a faultYour manual’s beep or LED table
Stopped after rain, a power cut or a stormWater or ants in the box; a flat battery; lightning damageSee “After rain, power cuts and storms” below

Stuck now? Book a gate motor repair, or WhatsApp us a short video

1. If the gate does nothing at all, check the power first

Most gate motors run off a mains charger and a backup battery. If both are gone, nothing happens.

  • Check the breaker in your DB board and the isolator switch near the gate, if you have one.
  • If the motor plugs into a socket, check the plug and try another appliance in that socket.
  • Check whether your area has a power cut or load reduction.
  • Many control cards have a light that shows mains is present. Your manual says which one.

If mains is fine and the gate still does nothing, the battery or fuse is next.

2. A worn-out battery makes the gate slow, stop halfway or die in a power cut

The backup battery keeps the gate working through power cuts.

Signs the battery is going:

  • The gate is slow, or stops halfway.
  • It works when mains is on but dies in a power cut.
  • It beeps more than usual.
  • It clicks but doesn’t move.

See gate motor repairs.

3. A fuse that blows once can be replaced; one that keeps blowing means a fault

Some gate motors have a fuse on the control card or in the charger. If it’s blown, the gate may do nothing at all. Your manual shows where it is and what rating to use.

If a new fuse blows again, don’t keep replacing it. A fuse that keeps blowing means there’s a fault (often a short on the card, water, ants or a failing motor). That’s a job for a technician.

Stuck now? Book a gate motor repair, or WhatsApp us a short video

4. If the motor runs but the gate doesn’t move, the manual release is probably open

Every gate motor has a manual release, usually opened with a key, so you can push the gate by hand when the motor can’t. If it was opened (by you, a family member or a visitor during a power cut) and never locked again, the motor runs but the gate doesn’t move.

Lock the release again the way your manual describes. You may need to move the gate a little by hand until the gear catches.

5. If the button works but the remote doesn’t, start with the remote’s battery

  • One remote doesn’t work, the others do: replace that remote’s battery first. They’re cheap and they go flat.
  • No remote works, but the intercom or a button does: the problem is the receiver or the remotes’ coding.
  • Remotes have to be held close to work: a weak remote battery, or the receiver’s aerial is damaged.

Most receivers can learn new remotes, and delete lost ones. Your manual explains how.

6. If the gate opens but won’t close, check the safety beams

Safety beams stop the gate closing on a car or a person. If they’re blocked or misaligned, the gate usually opens but won’t close, or reverses as it closes.

  • Look for anything between the beams: a pot plant, a bin, long grass, a parked car.
  • Wipe the beam lenses. Dirt and spider webs are common culprits.
  • Check whether a beam has been knocked out of line. Many beams have a light that shows when they’re aligned.
  • Low sun shining straight into a beam can confuse it at certain times of day.

Never bridge or tape over beams to make the gate close. If they’re damaged, have them replaced.

Stuck now? Book a gate motor repair, or WhatsApp us a short video

7. Often the motor is fine and the gate itself is stuck or heavy

Often the motor is fine and the gate is the problem. With the manual release open, push the gate by hand.

If it’s heavy or sticks:

  • clear stones, sand and leaves from the track
  • check the wheels for wear or broken bearings
  • check that the gate is still on its track and the guide rollers at the top are intact
  • check the rack along the gate: a gap between the rack and the gear, or worn teeth, makes the gate jump or stop

A heavy gate overloads the motor and flattens the battery quickly. Fixing the gate often fixes the “motor problem”.

8. Ants nesting on the control card can stop the gate

Ants love the warmth inside a gate motor. A nest on the control card can short it and stop the gate, or make it behave strangely. With the power off, look inside the cover.

After rain, a power cut or a storm, it’s usually water, a flat battery or lightning

After rain. Water in the control box, in a beam or in the intercom can stop the gate. If you can see water or condensation inside, switch off the power and call us. Don’t dry a wet control card with a hair dryer while it’s connected.

After a power cut. The battery carried the gate through the outage and may now be flat. Give it time on mains to recharge. If it still won’t work hours later, the battery is probably worn out. Some motors also need to relearn their open and closed positions after a complete loss of power; your manual explains this.

After a storm. Lightning can damage the control card, the charger, the beams or the intercom, even without a direct strike. If the gate is dead after a storm and the power and fuse are fine, it’s a technician job. Lightning and surge protection on the next repair helps prevent a repeat.

Stuck now? Book a gate motor repair, or WhatsApp us a short video

Beeps are fault codes, and your manual’s beep table explains them

Most modern gate motors report faults with a pattern of beeps or a flashing light: for example a low battery, no mains power, a beam problem, or the gate hitting something. The patterns differ between brands, models and even software versions, so we don’t list them here.

To read yours:

  1. Count the beeps or flashes, and note whether they repeat.
  2. Find your motor’s make and model on the label inside the cover.
  3. Look up the beep or LED table in the installation manual, or on the maker’s website.

Some motors also have modes that look like faults: a holiday lockout that ignores remotes, or a lockout after the gate has hit something several times in a row. The manual explains how to clear them.

Call a technician if the simple checks don’t fix it, or if anything smells, grinds or keeps blowing

Call us if:

  • you’ve checked power, battery, fuse, release, remotes, beams and the track, and it still doesn’t work
  • the fuse keeps blowing
  • you smell burning or hear grinding
  • the motor hums but the gate won’t move with the release locked
  • it stopped after a storm or got wet inside
  • the gate is off its track or very heavy to push

We quote before we fix, and we don’t go over the quote without your OK. Repairs carry the 3-month parts-and-labour warranty the Consumer Protection Act requires.

If the motor is past saving or was stolen, we fit a new gate motor, like a stolen gate motor replaced in Eikenhof. We also fit gate intercoms and access control that work with it.

Motor stolen, past saving or keeps failing? Get a quote for a new gate motor, or WhatsApp us a photo of your gate

A battery replaced on time, a clean track and a maintenance plan prevent most failures

  • Keep the track clean and the beams clear of plants.
  • Have lightning and surge protection fitted.
  • If your gate opens from your phone, check that the GSM unit isn’t 2G or 3G. Those networks are being switched off, with a national target of the end of 2027. See 4G upgrades.
  • Put the gate on a maintenance plan: we test the battery, beams, limits, gear and rack on every visit.
  • Estates, complexes and businesses: a maintenance contract catches flat batteries and worn parts before the gate sticks, with a signed report after every visit.

Still stuck? Send us a video and we’ll tell you what it is

Book a gate motor repair, WhatsApp us a short video of what the gate does, or call 083 659 0957.

Questions people ask

Why is my gate motor not working after a power outage?

Usually because the battery ran flat carrying the gate through the outage, or it’s too old to hold a charge. Give it a few hours on mains to recharge. If it still won’t work, the battery probably needs replacing, or the motor may need to relearn its end positions (check your manual).

Why won’t my gate close all the way?

The most common cause is the safety beams: something between them, dirt on the lenses or a beam knocked out of line. Other causes are debris in the track, a stiff wheel, or the closed position needing to be set again.

Why is my gate motor beeping?

The motor is reporting a fault, such as a low battery, no mains power or a beam problem. The beep patterns differ by brand and model, so count the beeps and look them up in your manual’s beep table.

Why does my gate motor click but not open?

Usually the battery is too weak to drive the motor, or the gate is too heavy or stuck. Check the battery first, then open the manual release and push the gate by hand to see if it moves freely.

Why does my gate motor fuse keep blowing?

Because there’s a fault: often a short on the control card, water or ants in the box, or a failing motor. Don’t keep fitting new fuses. Switch off the power and call a technician.

Not sure what you need? Send us a photo.