An electric fence on clear view fencing: brackets, strands and the certificate

Electric fence bracket column on a galvanised clearview fence at an industrial site

An electric fence on top of clear view fencing is fitted with brackets that clamp or slot onto the existing posts, so the mesh isn’t cut or drilled. The live strands run above the mesh, and the whole electric fence is built to SANS 10222-3 and certified.

It works on a new clear view fence or one that’s been up for years, as long as the posts are sound.

Why put an electric fence on clear view at all

Clear view mesh is hard to climb and slow to cut, but a determined person can still go over the top with a ladder or a blanket. The electric fence closes that gap.

  • It deters: a live fence on top is a clear message to anyone thinking of going over.
  • It detects: the alarm goes off if a strand is cut, shorted or pulled.
  • It links up: the alarm can go to your house alarm, your phone and your armed response company.

Need the fence as well? We quote clear view fencing with an electric fence on top on one quote, with one contact and one certificate.

The brackets fit the posts, not the mesh

  • Bracket columns clamp or slot onto the clear view posts and carry the strands above the mesh.
  • Slot-in brackets that fit the post profile mean nothing is drilled, so the posts’ coating stays sealed. That matters most near the sea or anywhere rust is a risk.
  • Straight or angled: angled brackets may lean out no more than 45°, and not over a neighbour’s property without their consent.
  • Gates need their own solution: electrified gates must open and close without shocking the person using them, and a gate contact can report when a gate is left open.

A real job: an electric fence on top of a 2.4 m clear view perimeter at a coastal estate, with omega brackets that slot into the posts.

How many strands, and how high

The number of strands depends on the gap you need to close above the mesh and how the line runs.

  • More strands, closer together, leave less room to get through.
  • Steep or stepped sections may need extra strands where the gap above the mesh opens up. On the coastal estate, 9 to 12 strands sit on the 2.4 m mesh, with 12 on the steep parts.
  • In a public area, such as along a road, the first live wire must be at least 1.5 m above the ground, or behind a barrier at least 1.5 m high. On most clear view fences the strands sit well above that, but it’s checked on site.

Wire, earthing and lightning protection

  • The wire is chosen for the conditions. Near the sea, stainless-steel wire and fittings don’t rust; inland there are more options. See our electric fence wire guide.
  • Earthing: enough earth spikes along the line, properly connected. The coastal estate is earthed every 30 m.
  • Lightning protection: a long, open line takes surges in summer storms. Lightning diverters and surge protection guard the energiser.

The energiser, zones and alarms

  • A security energiser certified to SANS 60335-2-76, sized for the length and the number of strands.
  • Zones, so an alarm tells you which side of the property was touched.
  • Battery backup, so it keeps working through power cuts.
  • Warning signs along public roads and paths, no more than 10 m apart, and at gates.
  • Razor or barbed wire on the fence is never electrified.

Planning a new electric fence? See electric fence installation.

The certificate covers the electric fence, not the mesh

Adding an electric fence to a clear view fence means the property needs an electric fence certificate for it. Only an installer registered with the Department of Employment and Labour may issue it, after testing every zone. You’ll need it when you sell; conveyancers ask for it. See the electric fence COC explained.

How we add an electric fence to clear view

Send us a photo of the top of your fence, a post close up, and the rough length. We check the posts, suggest the brackets, strands and zones, and quote it in writing. We never go over the quote without your OK. When it’s up, we test every zone and issue the certificate.

WhatsApp us a photo of your fence or call 083 659 0957. We’re in Walkerville and work across the Midvaal, Joburg South and the rest of Johannesburg.

Questions people ask

Can you put an electric fence on an existing clear view fence?

Yes, as long as the posts are sound. Brackets clamp or slot onto the posts and carry the strands above the mesh, so the mesh itself isn’t cut or drilled.

How many strands go on top of clear view fencing?

It depends on the gap to close above the mesh and the slope of the line. Steep sections often need more. The quote names the number for each section.

Do I need an electric fence certificate for an electric fence on clear view?

Yes. The certificate covers the electric fence, not the mesh under it, and only a registered electric fence installer may issue it once the fence passes its test.

Will drilling the posts make them rust?

Drilling can break the coating and let rust in, which is why slot-in or clamp-on brackets that fit the post are the better choice, especially near the sea.

Can the electric fence on my clear view link to my alarm?

Yes. The energiser’s alarm outputs can go to your house alarm and, from there, to your armed response company and your phone.

Not sure what you need? Send us a photo.