At a large distribution centre in Centurion, we put an electric fence on top of 3.2 km of precast concrete boundary wall. It runs in 28 zones off 14 energisers, housed in seven field stations around the site, and the sliding gates are electrified too. We tested every zone and issued the electric fence certificate.
Where: Centurion · Site: Distribution centre · Done: Dec 2023
A 3.2 km wall had to be covered, and every alarm had to say where
On a boundary this long, one energiser can't drive the whole fence, and one alarm for the whole wall wouldn't tell anyone where to look. The site's sliding gates had to be part of the fence as well, so there was no easy way round it.
We split the fence into 28 zones, run from seven field stations
- Fitted 6-line square-tube brackets about every 2.5 m along 3,206 m of precast wall, and strung the fence.
- Split the fence into 28 zones, so an alarm shows which stretch of wall was touched.
- Built seven field stations around the site, each with two energisers, two earth grids and four surge arresters.
- Earthed the fence with 60 earth spikes and fitted 28 lightning diverters.
- Electrified nine sliding gate leaves, about 79 m of gate in all.
- Put up about 340 warning signs along the wall.
- Tested every zone and issued the electric fence certificate.

What we installed
- 14 energisers in 7 field stations, 28 zones
- 6-line square-tube wall-top brackets, about every 2.5 m
- 14 earth grids, 60 earth spikes, 28 lightning diverters, 28 surge arresters
- Electrified sliding gates: 9 leaves, about 79 m
- About 340 warning signs
3.2 km of wall, 28 zones, certified
The whole 3.2 km wall carries a zoned electric fence, gates included. When it alarms, the zone shows which stretch of wall to check, and the site has its certificate.
Related: commercial and industrial electric fencing · electric fence certificates · monthly fence maintenance · more of our work
