Paradox alarm systems installed and upgraded across Johannesburg and Gauteng
We install Paradox alarm systems for homes, farms and businesses: a control panel with wired detectors, Paradox wireless detectors where a cable can’t go, and the link to your armed response company. We also add to, upgrade and take over the Paradox panels already in many buildings.
At a River Club home we programmed new wireless outdoor detectors into the existing Paradox alarm, so the garden and back wall now set it off. Read our 8 Google reviews.

Our job: an alarm control panel being wired in, high on the wall.
Most Paradox calls start with one of these
- The building is already cabled for an alarm, and you’d rather use the wiring than start again.
- There’s an old Paradox panel in the cupboard, and nobody has the installer code.
- You want to arm it from your phone, not only from the keypad.
- The garden and the outbuildings aren’t covered, and trenching a cable isn’t an option.
What a Paradox alarm system is, and how it works
A Paradox system is a control panel, usually in a cupboard, with keypads by the doors you use, detectors on the ways in, outdoor detectors in the garden and a siren. Arm it, and a tripped detector sets off the siren while the panel reports to your armed response company.
- Wired, wireless or both. Paradox describes its current controllers as hybrid: detectors wired to the panel, plus Paradox’s own wireless detectors and devices where a cable can’t reach.
- Keypads at the doors. Paradox makes LCD keypads and a 7-inch touchscreen, including wireless ones, so a keypad can go by a door with no cable to it.
- Your phone. With Paradox’s internet module on the panel, the BlueEye app lets you arm and disarm, get alarm notifications and give each person in the house their own access.
- Reporting. The panel signals your armed response company by radio, GSM or over the internet, through a communicator we fit and test with them.
- Power cuts. The panel’s backup battery runs the keypads, detectors and siren when the mains goes off.
Paradox suits buildings that are already cabled, bigger sites with many zones, and businesses where the office, stockroom and workshop are armed separately. In a finished house with no cabling, Ajax wireless is often the simpler fit, and we’ll say so.
Already have a Paradox panel? Send us a photo of it and the keypad.
Paradox alarm installation in four steps
- You WhatsApp us your suburb and a few photos, or a rough floor plan. If there’s a panel already, add a photo of it and the keypad.
- We visit or work from the photos, and tell you which detectors go where, what can stay, and whether wired, wireless or a mix suits the building.
- You get an itemised written quote. We fit the panel, keypads, detectors and siren, and add wireless devices where a cable can’t go.
- We link the panel to your armed response company and test it with them, set up the BlueEye app if you want it, and show everyone how to arm and disarm.
What moves the price of a Paradox alarm
The building sets the price more than the brand does: how many doors, rooms and outdoor areas need detectors, how much can be wired, the keypads, outdoor detectors and sirens, the internet module for the app, and the communicator that reports to your armed response company.
Cabling that’s already in the walls can keep the cost down. Your quote lists every item, and we don’t go past it without your OK.
Get a Paradox quote on WhatsApp
Send your suburb and a few photos. We’ll tell you what to fit, and what you can keep.
Already have Paradox? We add to it, upgrade it or take it over
- Adding wired or wireless detectors and outdoor beams to the panel you have.
- Adding Paradox’s internet module, so the alarm runs from your phone.
- Swapping an old 2G or 3G communicator for a 4G one.
- Replacing worn backup batteries and tired keypads.
- Taking over the servicing from another installer.
A takeover usually needs the installer code. That’s the code the last installer used to program the panel. Ask them for it first. If nobody has it, the manufacturer can sometimes reset it, and we check that before anything else. If it can’t be reset, we tell you plainly what’s possible before you spend money.
Older Paradox communicators on 2G or 3G need a 4G upgrade
South Africa’s networks are switching off 2G and 3G, with the end of 2027 as the target. An alarm on an old 2G or 3G communicator can carry on sounding its siren after it has stopped getting through to your armed response company.
We check what your panel reports through, fit a 4G or internet communicator, and test it with your armed response company on the day. More on alarm 4G upgrades.
Paradox or Ajax: we install both, and the building decides
| Paradox | Ajax | |
|---|---|---|
| Suits | Cabled buildings, bigger sites, many zones, businesses with separate areas | Finished homes, smallholdings with outbuildings, offices that change layout |
| Detectors | Wired to the panel, with Paradox wireless where needed | Wireless throughout |
| On your phone | BlueEye app, through an internet module on the panel | Ajax app, built into the hub |
| Power cuts | The panel’s backup battery runs the system | Detectors on their own batteries, the hub on its backup battery |
We’re not agents for either brand, so we recommend what suits the building. Our guide to wired or wireless alarms goes into more detail.
Questions
Questions people ask us
Is Paradox a good alarm system?
For the right building, yes. It’s one of the two alarm brands we install, and it suits buildings that are already cabled, bigger sites and businesses with separate areas. In a finished house with no cabling, Ajax wireless is often easier to fit.
Can I control my Paradox alarm from my phone?
Yes, once the panel has Paradox’s internet module. Paradox’s BlueEye app then lets you arm and disarm, get alarm notifications and give each user their own access. Paradox lists which panels the modules work with, so we check yours first.
Can you take over a Paradox alarm without the installer code?
Sometimes. A takeover usually needs the installer code, so ask the old installer for it first. If nobody has it, the manufacturer can sometimes reset it. If it can’t be reset, we’ll tell you what can be done before any work starts.
Does a Paradox alarm work in a power cut?
Yes, on its backup battery, which runs the panel, keypads and detectors. How long it lasts depends on the battery and how much the system has to run, so have the battery tested on a service. For the app to work in a power cut, your router needs backup power too.
Wired or wireless Paradox: which do I need?
Wired where the cable is already in the walls or easy to run, wireless for gardens, outbuildings and finished rooms. Paradox’s hybrid panels take both on the same system, so you don’t have to choose one for the whole building.
How much does a Paradox alarm system cost?
It depends on how many detectors, keypads and outdoor beams the building needs, how much of it can be wired, and whether you want the app and a 4G communicator. WhatsApp us photos or a floor plan and you’ll get an itemised written price.
Get in touch
Tell us about the building, or send a photo of your Paradox panel
WhatsApp a few photos and your suburb, or call us between 08:00 and 17:00, Monday to Friday. We install Paradox alarms across Johannesburg, Pretoria and Centurion, the East Rand and the Midvaal.
Saxmoore is run by Matthew Moore from 114 Main St, Walkerville, and the same team can fit your electric fence, gate motor and cameras.
- 083 659 0957, calls and WhatsApp
- 114 Main St, Walkerville, 1876
- matthew@saxmoore.co.za
